REDARC Smart Start Battery Isolator 12V-BMS Standard Load Disconnect Controller

127.22  ex. VAT

The SBI12-BLD is used in conjunction with a REDARC Manager15 or Manager30 BMS to protect the auxiliary battery from excessive discharge.

In stock

SKU: SBI12-BLD Categories: , , ,
 

Description

The SBI12-BLD is used in conjunction with a REDARC Manager15 or Manager30 BMS to protect the auxiliary battery from excessive discharge. Specifically designed for use as the load disconnect solenoid controlled by the BMS, the black (earth wire) should be connected to the load pin of the BMS.

The BMS sets the turn on and turn off points through its settings and switches this black wire (earth when loads should be on, no earth when loads should be off), and there is additional voltage thresholds monitored by the Smart Start SBI12-BLD to ensure reliable solenoid engagement.

Voltage spike protection

The SBI12-BLD smart start battery isolator incorporates a number of spike protection components specifically designed to reduce the risk of damaging the unit, and is designed to prevent any spikes generated by the solenoid coil from affecting vehicle equipment.

Features

  • Overmould design
  • Compact in size and easy to install
  • Silver contacts for longer life and suitable for marine applications
  • Power saving technology
  • Fault indication
  • Fully surge protected

 

Additional information

Weight 1 kg
System Voltage

12V Nominal

Turn ON Voltage

10.2V

Turn OFF Voltage

10.0V

Turn ON Delay

5 sec

Turn OFF Delay

10 sec

Max. Cont. Current

100 Amps

Max. Inrush Current

400Amps

Standby Current

< 5mA

Operating Current

<0.1A

Warranty

2 Years

Weight (kg)

0.2

Width (mm)

75

Length (mm)

70

Height (mm)

80

Standards

AS/NZS CISPR11:2004, C-Tick, CE

Main Stud Torque

5-6.2 Nm